Joyetech eVic Aio
Uses Cubis/Aio Coils 3.5ml Tank All in One
Being the all-in-one concept, eVic AIO features an interchangeable plate which allows to replace the battery or atomizer easily. eVic AIO adopts the best anti-leaking structure with top refilling and top airflow control system. Large 0.96-inch OLED screen, colorful stickers and multiple coil options all make it more practical and attractive catering to your preference. Also, upgradable firmware always enables it up-to-date.
Variable temperature control
Real time clock display
Detachable structure and replaceable battery & glass tube
Top airflow control brings large air inlet
Upgradeable firmware with changeable LED lights
All-in-one device with separate atomizer adapter (battery not included)
Dual Circuit Protection And Reverse Polarity Protection
Multiple Atomizer Heads Can Be Applied
Requires one 18650 battery (not included)
Output Mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR
Output Wattage: 1-75W
Resistance range: 0.05 - 1.5ohm under VT/TCR mode; 0.1 - 3.5ohm under VW/Bypass mode
Temperature range: 200~600℉ or 100~315℃
E-juice Capacity: 3.5ml
Colors: black, silver
- 1 x eVic AIO VT
- 1 x NotchCoil 0.25ohm DL.
- 1 x BF SS316 0.5ohm coil head DL.
- 1 x LVC Clapton 1.5ohm MTL.
- 1 x QCS coil
- 2 x mouthpiece
- 1 x USB Cable
- 1 x Adapter
- 2 x Sticker
- 1 x Manual & Warranty Card & Authenticity Sticker
- 1 x Warning card
- 1 x Box Packaging
How To Use:
Press the fire button 5 times in quick succession to turn the device on.
In the same way, the device will be powered off after 5 presses.
Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Shift between VT/VW/Bypass/TCR Modes:
Press the fire button for three times to shift between diffferent Modes when the battery is on.
(1)under VW mode, it presents: battery life, ohm, voltage and wattage.
(2)under VT mode, it presents: battery life, ohm, wattage, temperature and mode (Ni/Ti).
Adjust the wattage/temperature:
Under VW mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the wattage (up to 80W); under VT mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the temperature (100-315℃/200-600℉).
Rotate the ring faster clockwise or counterclockwise for continuous three grades, the device automatically increase or decrease 0.1W/5℃(10℉) numerically.
E-juice filling can be easily achieved by removing the top cap and injecting through the two side holes (not the vent pipe) directly.
Apply the Atomizer Adapter
Unscrew the airflow ring and remove the whole part. Screw the atomizer adapter tightly with a coin, then you're able to apply multiple types of atomizers with the 510 pin.
Warranty: Joyetech 90 Day Battery Not Included